AMIGO Arms
Line 33: | Line 33: | ||
|- | |- | ||
|- border="0" | |- border="0" | ||
− | | | + | | This documentation describes Open Hardware and is licensed under the <br> |
− | + | ||
− | This documentation describes Open Hardware and is licensed under the <br> | + | |
CERN OHL v. 1.1. <br> | CERN OHL v. 1.1. <br> | ||
You may redistribute and modify this documentation under the terms of the <br> | You may redistribute and modify this documentation under the terms of the <br> |
Revision as of 20:19, 30 November 2011
Part Links |
Author |
Philips |
Contact |
CAD Files |
Inventor |
STEP |
Electrical Drawings |
Not Available |
AMIGO: Head | Arms | Torso | Base
Contents |
Part Summary
AMIGO has been equipped with two Philips Experimental Robotic Arms (PERA) to be able to grasp objects in a household environment.
- Author: Philips
- License: CERN OHL v.1.1
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.1. |
- Repository: https://rop.wtb.tue.nl/svn/rop/AMIGO/PERA/
- Software: www.ros.org (Coming Soon)
Overview
The upper body is equipped with two arms, bolted onto either side (figure 3). The arms are designed by Philips and are named Philips Experimental Robotic Arms (PERA). The PERA arm is an anthropomorphic arm, i:e:, it closely resembles the human arm regarding dimensions, structure and movability. It has 7 DOF, namely 3 DOF in the spherical shoulder joint, 2 DOF in the universal elbow joint and 2 DOF in the universal wrist joint. The arm’s end effector is a two-fingered hand, containing a revolute joint between the hand link and either of the finger links. The CAD models are shown in figures 1 and 2. Not much information about the PERA's will be supplied since the knowledge behind these arms isn't open source.
Figures 1 and 2 show estimated CAD models of the arms.
Mechanics
Assembly of the Arms to the Torso
The arms are bolted to the sides of the upper body (torso) (figure 3). 8 M5 bolts are used for to secure their position.
Electronics
Not Available