Contents 1 Introduction

Introduction

This manual was written with the purpose of facilitating the contribution process to ROP. ROP was launched to become a central place for the exchange of robotic hardware designs through embedded wiki pages. Comparable to open source software, companies and research institutions can release their robot hardware design on ROP under an open hardware license. The essence of sharing open-source hardware is sharing the design files, but there are many other hardware design-related files that can decrease the development efforts required to build a robot. Please note that you are not required to post all files discussed below, but the more you contribute, the faster your design will be adapted by the community. The contents of this document are mainly based on a work of the Open Source Hardware Association (OSHWA) on the best practices for sharing open-source hardware [1].